Following directions specifically used…
Following directions specifically used a 8 ounce bottle in a V8 ram 1500 engine. Had a small slow leak which it did not stop. Took into shop had water pump replaced and had to replace thermostat and temperature sensor as both were clogged up. Coolant system was flushed then. Immediately had trouble with clogging the coolant systems since, clogged up the new thermostat causing it to overheat and stopped putting hot air into the cab with heater, back into the shop flushed the system two more times still bringing out gunk.
Besvarelse fra K-Seal
Hi Stephen,
I can see this review is a copy-and-paste from the email you sent us, but I have no visibility into any further information.
Unfortunately, if you had contacted us before the mechanic replaced parts, we could have worked with you to avoid unnecessary expense.
K-Seal itself cannot cause a blockage, particularly in a water pump with moving parts, so I would have questioned the mechanic directly about why that had to be changed.
It is also not an adhesive, so the Thermostat cannot become stuck.
Without knowing anything about the original coolant leak or whether any of the work you had done solved the leak, I am not able to comment further.
Colin.