v1.0.x is based on two docker-compose files.
-
netdc for networking (dnsmasq,wireguard,dnscrypt)
-
main: for hass component (appd,influx,Grafana..)
-
Home water consumption/leakage detection. see wiki
-
Tasmota + Wemo d1
-
Sensor water sensor ev 1 litter
-
-
Air Conditioner automation (Electra /Israel)
-
Uses SonOff 4ch pro for cold switch on/off
-
-
Alarm: Converting old PIMA Alarm + xiaomi mii sensros to be new smart alarm inspired by konnected
-
Tasmota/Wemo d1/i2c 16 gpio
-
Could scale with gpio/cheaper
-
It uses Tasmota firmware
-
-
Media automation
-
Israel Boiler — keep the water always hot in specific temperature. see wiki
-
Tasmota +Sonoff TH16 + DS18b20 raw chip inside the mechanical termostat of the Boiler
-
-
Light — turn them automaticly using PIR
-
Tasmota + WemoD1 mini
-
-
Cameras — BlueIris as DVR + PIR using Object detection Yolo3
-
Weather based Irrigation see wiki
-
Tasmota +Sonoff 4CH Pro
-
48vAC Power
-
Taps to control the taps
-
Used for defining Tasmota sensors/switch/binary sensors
Copy this project <config directory>/custom_components/ folder to your <config directory> directory
make sure you are in sync with the the right version of hass (see above)
Using this, you could define a sensor that saves Tasmota counter_id pulses info to none-volatile home assistance database. See discussion here 4681
- platform: mytasmota
name: water_total
stopic: water_out
id: 1
max_valid_diff: 2000
unit_of_measurement: 'l'
icon: mdi:water-pump
expire_after: 300
value_template: "{{ (45497 + (value))|int }}"stopic: the short topic. for example the full topic will be tele/stopic/SENSOR
counter_id: the id of the counter 1..4
max_valid_diff: maximum difference in 60 sec
Define a switch in a simpler way. It just works
-
Always in sync with hass
-
No need Option59,
-
No need startup script command
-
No need to define LWT/Qos. Qos is 1
See discussion here 18703
switch:
- platform: mytasmota
name: HASS_DEVICE
index: '1'
stopic: SHORT_TOPICstopic: the short topic. for example the full topic will be tele/stopic/SENSOR e.g. tele/irrigation/SENSOR
name: e.g. wbi_p1 the switch.wbi_p1 the full name
Define 16/8 binary sensors based on MCP230xx chipset in a simple way. This chip has two mqtt async responses(interrupt and status) and it is tedious to define all of them.
tasmota:
devices:
- name: HASS_NAME
stopic: TOPIC
binary_sensors:
- name: door
polar: true
- name: vol
polar: true
- name: kitchen
polar: true
- name: backdoor
polar: true(does not work with docker-compose version) Using script to trigger tracker from tracking-dhcp use custom component to let hass known mqtt_dnsmasq.py to get the info from dnsmasq.sh
A/C Type: Electra with SonOff 4ch for enable/disable, connected to CLK input (plan to reverse engineer modbus signal for better way controling this)
Keep the A/C at specific temperator, at specific days of the week
heater_ac1:
module: heat_app
class: HeatApp
schedule:
- { mode: a, start: { t: "17:10:00", d: 6}, end: { t: "17:11:00", d: 6} }
- { mode: a, start: { t: "17:15:20", d: 6}, end: { t: "23:30:40", d: 6} }
- { mode: a, start: { t: "08:00:00", d: 7}, end: { t: "13:30:00", d: 7} }
- { mode: a, start: { t: "15:30:00", d: 7}, end: { t: "19:30:00", d: 7} }