I am very happy that a number of people are interested to design a box for this clock. We can then select the best one (or two or three) and build them. Have fun!

• Please keep in mind, the box will be 3D printed
• If you would like to add a pattern, colors or picture at the enclosure, it is possible. We may use multicolor 3D printing for one of the projects.
• The panel between segments needs to have black color (otherwise the light from the segments will go through)

• The clock is built from addresable RGB leds, so it is possible to change colors of each segment. The clock display is built from four seven segment numbers + two dots in the middle + one dot at the bottom end of display. The white part of the display is an adhesive film diffuser.
• Additional external addresable RGB LEDs can be connected if it would make the box nicer. For example I 3D printed a cat for my daugther's clock and the cat's eyes are changing color.
• There is also a light sensor to control display brigthness. It's mounted at the front of the PCB (it is hidden behind the white diffuser)
• There are 3 buttons at the back. Currently these buttons can be used to set the time or start the stop watch, but they can be used for anything.
• The clock is powered through USB-C and it has a battery backed up RTC chip which will keep running when USB-C is disconnected (means when USB-C is disconnected, the clock display will show nothing, but when connected again to power, the time will be correct).

If you have any questions, let me know through LinkedIn message or at [email protected]