Devlopment

prisma/schema.prisma

@@ -14,9 +14,14 @@ model MemberAnalytics {
 }
 
 model MessageAnalytics {
-  time      DateTime @id @default(now()) @db.Timestamptz(6)
-  memberId  String   @db.VarChar
-  channelId String   @db.VarChar
+  time      DateTime @id(map: "MessageAnalytics_pk") @default(now()) @db.Timestamptz(6)
+  memberId  String?  @db.VarChar
+  channelId String?  @db.VarChar
+}
+
+model CommandAnalytics {
+  time    DateTime @id(map: "CommandAnalytics_pk") @default(now()) @db.Timestamptz(6)
+  command String?  @db.VarChar
 }
 
 enum MemberAnalyticsEvent {

src/commands/tag.ts

@@ -24,7 +24,7 @@ export class TagCommand extends Command {
             .setRequired(true)
             .addChoices(
               { name: 'ask', value: 'ask' },
-              // { name: 'avrdude', value: 'avrdude' },
+              { name: 'avrdude', value: 'avrdude' },
               // { name: 'codeblock', value: 'codeblock' },
               // { name: 'espcomm', value: 'espcomm' },
               // { name: 'hid', value: 'hid' },

src/utils/tags.ts

@@ -1,14 +1,82 @@
 import { MessageEmbed } from 'discord.js';
-import universalEmbed from '../index'
+import universalEmbed from '../index';
 export default {
   ask: {
     embeds: [
-      new MessageEmbed(universalEmbed).setTitle('Dont ask to ask - Just ask!').addFields({
-        // TODO: Turn slash command reference into a button
-        name: 'Describe what your code/hardware does and what you want it to do instead. Sharing is caring! Share your code, use /tag `name: codeblock` to learn how.',
-        value:
-          'Keep in mind: no one here is paid to help you, so the least you can do is to refine your question in a proper language.',
-      }),
+      new MessageEmbed(universalEmbed)
+        .setTitle('Dont ask to ask - Just ask!')
+        .addFields({
+          // TODO: Turn slash command reference into a button
+          name: 'Describe what your code/hardware does and what you want it to do instead. Sharing is caring! Share your code, use /tag `name: codeblock` to learn how.',
+          value:
+            'Keep in mind: no one here is paid to help you, so the least you can do is to refine your question in a proper language.',
+        }),
+    ],
+  },
+  // have no Idea what I am doing sorry.
+  avrdude: {
+    embeds: [
+      new MessageEmbed(universalEmbed)
+        .setTitle('Solving AVRDUDE communication errors (Try these in order)')
+        .addFields(
+          {
+            name: '1. Is your Serial monitor open?',
+            value:
+              'If it is, close it. this allows your IDE to upload sketches without conflicts with the Serial Monitor.',
+          },
+          {
+            name: '2. Have you selected the right port in your IDE?',
+            value:
+              'You could have selected something that is **not** your Arduino. Change the port in the Arduino IDE by going into Tools -> Port.',
+          },
+          {
+            name: '3. Have you selected the right board in your IDE?',
+            value: 'You need to select the right board and model.',
+          },
+          {
+            name: 'You need to select the right board and model.',
+            value:
+              'If it does, unplug and re-plug your board, then check for blinking LEDs. If only the Power LED or no LEDs light up ask for further assistance (not for all boards).',
+          },
+          {
+            name: '5. Do you have a Nano or other Atmega 328p based board?',
+            value:
+              "If so, try using the old bootloader. In the Arduino IDE Go to Tools -> Processor and select 328p(old bootloader). If your board doesn't have an Atmega 328p, you can skip this step.",
+          },
+          {
+            name: '6. Does your onboard LED blink when you press the reset button?',
+            value:
+              "Try pressing the reset button on your Arduino, if the onboard LED doesn't blink when you reset, you probably have a broken bootloader, you can check out [this tutorial](https://www.arduino.cc/en/Hacking/Bootloader?from=Tutorial.Bootloader) on how to burn the bootloader.",
+          },
+          {
+            name: '7. Is anything connected to your Tx and Rx pins?',
+            value: 'If there is, try removing everything connected to them.',
+          },
+          {
+            name: "8. Is this a problem on your computer's side?",
+            value:
+              "This might be a problem on your computer's side, so try restarting your computer.",
+          },
+          {
+            name: '9. Are you running Linux?',
+            value:
+              'If you are running Linux, try checking which groups you belong by using the `groups` command, then look at which group you need to be in with `ls -l /dev/ttyACM*`, `ls -l /dev/S*` or `ls -ls /dev/USB*` (replace the `*` with your port number), then use this command:- `sudo usermod -a -G <group> <username>` and add your user to the necessary groups.',
+          },
+          {
+            name: '10. Are your drivers installed?',
+            value:
+              "Check your drivers, sometimes just reinstalling them works. If you are using a clone board, you might have the CH340 USB-Serial chip, which isn't supported by default. You can check by looking at your board and checking the SMD USB-Serial chip's name (not the big one). [Click here](https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all) to learn how to install CH340 Drivers. If you have an FTDI chip, [This website](https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/all) will show you how to install their drivers. If you don't have either we recommend googling the USB-Serial chip that your board uses.",
+          },
+          {
+            name: '11. Is your cable faulty or capable of sending data?',
+            value:
+              'Some USB cables arent capable of transferring data, and some may be faulty, so make sure to try a different one to see if it works!',
+          },
+          {
+            name: '12. Is this a problem with your IDE?',
+            value: "If you think that's the case, try reinstalling the IDE.",
+          }
+        ),
     ],
   },
 };