ABS sensor A.B.S. AUDI A3
A.B.S. ABS sensor
AUDI A3 catalogue online
A.B.S. Wheel speed sensor Top AUDI A3 Models
Sensor ABS AUDI A3 in brand quality: Top Manufacturers
ABS sensor A.B.S. AUDI A3: review
Top 1 Reviews
I’ve returned item as my car was misdiagnosed however auto doc gave the best prices. I’m just awaiting refund
Have you ever bought A.B.S. products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
A.B.S. ABS wheel speed sensor AUDI A3 of brand quality in our amazing selection
We offer A.B.S. brand produts in OEM quality. Find the right branded ABS sensor spare part your AUDI A3 car in our catagory.
A.B.S. 30017 ABS sensor
Active sensor, 66mm, 28mm, black
Sold by AUTODOC
A.B.S. 30013 ABS sensor
Active sensor, 62mm, 21mm, black
Sold by AUTODOC
A.B.S. 30146 ABS sensor
Active sensor, 66mm, 28mm, grey
Sold by AUTODOC
A.B.S. 30014 ABS sensor
Active sensor, 62mm, 21mm, black
Sold by AUTODOC
A.B.S. 31392 ABS sensor
Active sensor, 70mm, 38mm, grey
Sold by AUTODOC
A.B.S. 32315 ABS sensor
Active sensor, 60mm, 21mm, black
Sold by AUTODOC
A.B.S. 32246 ABS sensor
Active sensor, 66mm, 27mm, grey
Sold by AUTODOC
A.B.S. 32245 ABS sensor
Active sensor, 66mm, 27mm, grey
Sold by AUTODOC
A.B.S. 32314 ABS sensor
Active sensor, 60mm, 21mm, black
Sold by AUTODOC
A.B.S. 30008 ABS sensor
Passive sensor, 240mm, 290mm, 28mm, black
Sold by AUTODOC
A.B.S. 30257 ABS sensor
Active sensor, 75mm, 37mm, black
Sold by AUTODOC
A.B.S. 30019 ABS sensor
Active sensor, 78mm, 40mm, black
Sold by AUTODOC
A.B.S. 30145 ABS sensor
Active sensor, 66mm, 28mm, grey
Sold by AUTODOC
A.B.S. 30020 ABS sensor
Active sensor, 78mm, 40mm, black
Sold by AUTODOC
A.B.S. 30018 ABS sensor
Active sensor, 66mm, 28mm, black
Sold by AUTODOC
A.B.S. abs sensor for AUDI A3: top must-read articles
A.B.S. ABS sensor: What is the price of this product for the AUDI A3?
The price of A.B.S. products in the category ABS sensor for the AUDI A3 ranges from £10.00 to £20.00, depending on the features and specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return A.B.S. abs sensor for AUDI A3 without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
