ABS sensor FEBI BILSTEIN AUDI A3
FEBI BILSTEIN ABS sensor
AUDI A3 catalogue online
FEBI BILSTEIN Wheel speed sensor Top AUDI A3 Models
Sensor ABS AUDI A3 in brand quality: Top Manufacturers
ABS sensor FEBI BILSTEIN AUDI A3: review
Top 4 Reviews
I've chosen this product hoping it's right unlike the first two I was supplied with
i trust the brand
It is a recognised brand and is available at a decent price.
Have you ever bought FEBI BILSTEIN products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
FEBI BILSTEIN ABS wheel speed sensor AUDI A3 of brand quality in our amazing selection
We offer FEBI BILSTEIN brand produts in OEM quality. Find the right branded ABS sensor spare part your AUDI A3 car in our catagory.
FEBI BILSTEIN 23826 ABS sensor ring
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
FEBI BILSTEIN 23824 ABS sensor
Sold by AUTODOC
FEBI BILSTEIN 21582 ABS sensor
Front Axle Left
Sold by AUTODOC
FEBI BILSTEIN 23810 ABS sensor
Rear Axle Left
Sold by AUTODOC
FEBI BILSTEIN 103021 ABS sensor
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
FEBI BILSTEIN 32861 ABS sensor
Sold by AUTODOC
FEBI BILSTEIN 32862 ABS sensor
Sold by AUTODOC
FEBI BILSTEIN 23498 ABS sensor
Rear Axle Left, Rear Axle Right, 205mm
Sold by AUTODOC
FEBI BILSTEIN 21584 ABS sensor
Front Axle Right
Sold by AUTODOC
FEBI BILSTEIN 23808 ABS sensor
Rear Axle Right
Sold by AUTODOC
FEBI BILSTEIN 22510 ABS sensor
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
FEBI BILSTEIN 33541 ABS sensor
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
FEBI BILSTEIN 23822 ABS sensor
Sold by AUTODOC
FEBI BILSTEIN 23816 ABS sensor
Front Axle Right
Sold by AUTODOC
FEBI BILSTEIN 23814 ABS sensor
Front Axle Left
Sold by AUTODOC
FEBI BILSTEIN abs sensor for AUDI A3: top must-read articles
FEBI BILSTEIN ABS sensor: What is the price of this product for the AUDI A3?
The price of FEBI BILSTEIN products in the category ABS sensor for the AUDI A3 ranges from £8.00 to £30.00, depending on the features and specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return FEBI BILSTEIN abs sensor for AUDI A3 without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
