ABS sensor NTY FORD KUGA
NTY ABS sensor
FORD KUGA catalogue online
NTY Wheel speed sensor Top FORD KUGA Models
Sensor ABS FORD KUGA in brand quality: Top Manufacturers
ABS sensor NTY FORD KUGA: review
Top 1 Reviews
Have you ever bought NTY products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
NTY ABS wheel speed sensor FORD KUGA of brand quality in our amazing selection
We offer NTY brand produts in OEM quality. Find the right branded ABS sensor spare part your FORD KUGA car in our catagory.
NTY HCA-FR-064 ABS sensor
Rear Axle Left, Rear Axle Right, Right
Sold by AUTODOC
NTY HCA-FR-022 ABS sensor
Rear Axle Left, Rear Axle Right, Rear Axle, 4-pin connector
Sold by AUTODOC
NTY HCA-FR-065 ABS sensor
Rear Axle Left, Rear Axle Right, without cable, 2-pin connector
Sold by AUTODOC
NTY HCA-FR-063 ABS sensor
Front Axle Left, Front Axle Right, Active sensor
Sold by AUTODOC
NTY HCA-FR-068 ABS sensor
Rear Axle Left, Rear Axle Right, Active sensor, 38mm
Sold by AUTODOC
NTY HCA-MZ-018 ABS sensor
Rear Axle Left, Rear Axle Right, without cable, for vehicles with ABS
Sold by AUTODOC
NTY HCA-VV-016 ABS sensor
Rear Axle Left, Rear Axle Right, without cable, Active sensor, 2-pin connector, 38mm, 14mm
Sold by AUTODOC
NTY HCA-FR-010 ABS sensor
Rear Axle Left, without cable, Active sensor
Sold by AUTODOC
NTY HCA-MZ-019 ABS sensor
Front Axle Left, Front Axle Right, without cable, 2-pin connector
Sold by AUTODOC
NTY HCA-FR-011 ABS sensor
Front Axle Left, Front Axle Right, Right
Sold by AUTODOC
NTY NZA-BM-001 ABS sensor ring
Number of Teeth: 48, Front axle both sides, Wheel Side
Sold by AUTODOC
NTY HCA-FR-037 ABS sensor
Front Axle Left, Front Axle Right, Right
Sold by AUTODOC
NTY HCA-HD-078 ABS sensor
Front Axle Left, with cable, 2-pin connector
Sold by AUTODOC
NTY HCA-FR-027 ABS sensor
Front Axle Left, Front Axle Right, Right
Sold by AUTODOC
NTY HCA-FR-015 ABS sensor
Front Axle Left, Left
Sold by AUTODOC
NTY abs sensor for FORD KUGA: top must-read articles
NTY ABS sensor: What is the price of this product for the FORD KUGA?
The price of NTY products in the category ABS sensor for the FORD KUGA ranges from £5.00 to £31.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return NTY abs sensor for FORD KUGA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
