ABS sensor VEMO HYUNDAI ix35
VEMO ABS sensor
HYUNDAI ix35 catalogue online
VEMO Wheel speed sensor Top HYUNDAI ix35 Models
Sensor ABS HYUNDAI ix35 in brand quality: Top Manufacturers
Have you ever bought VEMO products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
VEMO ABS wheel speed sensor HYUNDAI ix35 of brand quality in our amazing selection
We offer VEMO brand produts in OEM quality. Find the right branded ABS sensor spare part your HYUNDAI ix35 car in our catagory.
VEMO 1092281 ABS sensor
Rear Axle Right, Q+, original equipment manufacturer quality, for vehicles with ABS, 14 Ohm, 1100mm, 12V
Sold by AUTODOC
VEMO 1037129 ABS sensor
Rear Axle Left, Q+, original equipment manufacturer quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1017585 ABS sensor
Front Axle Left, Q+, original equipment manufacturer quality, for vehicles with ABS, 14 Ohm, 1070mm, 12V
Sold by AUTODOC
VEMO 1047086 ABS sensor
Front Axle Right, with holder, 2-pin connector, angular
Sold by AUTODOC
VEMO 1060647 ABS sensor
Rear Axle Right, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1042208 ABS sensor
Front Axle Right, Q+, original equipment manufacturer quality, for vehicles with ABS, 13 Ohm, 1070mm, 12V
Sold by AUTODOC
VEMO 1010444 ABS sensor
Rear Axle Left, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1056060 ABS sensor
Rear Axle Right, Original VEMO Quality, for vehicles with ABS, 2-pin connector, 14000 Ohm, 1020mm, 12V
Sold by AUTODOC
VEMO 1053739 ABS sensor
Rear Axle Left, Q+, original equipment manufacturer quality, for vehicles with ABS, 13 Ohm, 1100mm, 12V
Sold by AUTODOC
VEMO 1031698 ABS sensor ring
Rear Axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1000286 ABS sensor
2-pin connector, angular
Sold by AUTODOC
VEMO 1015470 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1074750 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1016386 ABS sensor
Rear Axle Left, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1082983 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO abs sensor for HYUNDAI ix35: top must-read articles
VEMO ABS sensor: What is the price of this product for the HYUNDAI ix35?
The price of VEMO products in the category ABS sensor for the HYUNDAI ix35 ranges from £4.00 to £58.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return VEMO abs sensor for HYUNDAI ix35 without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
