VEMO ABS sensor HYUNDAI
VEMO ABS sensor HYUNDAI catalogue online
VEMO Wheel speed sensor Top HYUNDAI Models
Sensor ABS HYUNDAI in brand quality: Top Manufacturers
The most sold VEMO ABS sensor HYUNDAI
You can select your ABS sensor HYUNDAI out of a(n) VEMO selection of high quality products. All of our car parts are of the highest VEMO brand quality, despite our low prices.
VEMO 1031698 ABS sensor ring
Rear Axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1000286 ABS sensor
2-pin connector, angular
Sold by AUTODOC
VEMO 1015470 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1074750 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1016386 ABS sensor
Rear Axle Left, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1082983 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1034975 ABS sensor
Front Axle Left, Q+, original equipment manufacturer quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1092281 ABS sensor
Rear Axle Right, Q+, original equipment manufacturer quality, for vehicles with ABS, 14 Ohm, 1100mm, 12V
Sold by AUTODOC
VEMO 1035863 ABS sensor
Rear Axle Left, Original VEMO Quality, for vehicles with ABS, 2-pin connector, 740mm, 785mm, 12V
Sold by AUTODOC
VEMO 1053739 ABS sensor
Rear Axle Left, Q+, original equipment manufacturer quality, for vehicles with ABS, 13 Ohm, 1100mm, 12V
Sold by AUTODOC
VEMO 1080167 ABS sensor
Rear Axle Right, 2-pin connector, angular
Sold by AUTODOC
VEMO 1049847 ABS sensor
Rear Axle Right, 2-pin connector
Sold by AUTODOC
VEMO 1086725 ABS sensor
Front Axle Left, 2-pin connector, oval
Sold by AUTODOC
VEMO 1077226 ABS sensor
Front Axle Right, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1012430 ABS sensor
Rear Axle Right, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO abs sensor for HYUNDAI: top most popular articles
VEMO ABS sensor: What is the price of this product for the HYUNDAI?
The price of VEMO products in the category ABS sensor for the HYUNDAI ranges from £4.00 to £41.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return VEMO abs sensor for HYUNDAI without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
