ABS sensor ATE OPEL INSIGNIA
ATE ABS sensor
OPEL INSIGNIA catalogue online
ATE Wheel speed sensor Top OPEL INSIGNIA Models
Sensor ABS OPEL INSIGNIA in brand quality: Top Manufacturers
Have you ever bought ATE products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
ATE ABS wheel speed sensor OPEL INSIGNIA of brand quality in our amazing selection
We offer ATE brand produts in OEM quality. Find the right branded ABS sensor spare part your OPEL INSIGNIA car in our catagory.
ATE 360403 ABS sensor
740mm
Sold by AUTODOC
ATE 360446 ABS sensor
730mm
Sold by AUTODOC
ATE 360353 ABS sensor
881mm
Sold by AUTODOC
ATE 360413 ABS sensor
1674mm
Sold by AUTODOC
ATE 360414 ABS sensor
1245mm
Sold by AUTODOC
ATE 360411 ABS sensor
1841mm
Sold by AUTODOC
ATE 360412 ABS sensor
1417mm
Sold by AUTODOC
ATE 360327 ABS sensor
766mm
Sold by AUTODOC
ATE 360410 ABS sensor
1438mm
Sold by AUTODOC
ATE 360543 ABS sensor
854mm
Sold by AUTODOC
ATE 360371 ABS sensor
530mm
Sold by AUTODOC
ATE 360339 ABS sensor
720mm
Sold by AUTODOC
ATE 360340 ABS sensor
720mm
Sold by AUTODOC
ATE 360355 ABS sensor
574mm
Sold by AUTODOC
ATE 360647 ABS sensor
720mm
Sold by AUTODOC
ATE abs sensor for OPEL INSIGNIA: top must-read articles
ATE ABS sensor: What is the price of this product for the OPEL INSIGNIA?
The price of ATE products in the category ABS sensor for the OPEL INSIGNIA ranges from £18.00 to £58.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return ATE abs sensor for OPEL INSIGNIA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
