ABS sensor JP GROUP OPEL MERIVA
JP GROUP ABS sensor
OPEL MERIVA catalogue online
JP GROUP Wheel speed sensor Top OPEL MERIVA Models
Sensor ABS OPEL MERIVA in brand quality: Top Manufacturers
Have you ever bought JP GROUP products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
JP GROUP ABS wheel speed sensor OPEL MERIVA of brand quality in our amazing selection
We offer JP GROUP brand produts in OEM quality. Find the right branded ABS sensor spare part your OPEL MERIVA car in our catagory.
JP GROUP 3397102500 ABS sensor
Front Axle Right, Front Axle Left, Active sensor, 1140mm, black
Sold by AUTODOC
JP GROUP 1297100500 ABS sensor
Front Axle Right, Front Axle Left, Hall Sensor, 2-pin connector, 740mm
Sold by AUTODOC
JP GROUP 1297103300 ABS sensor
Rear Axle Left, Rear Axle Right, Active sensor, 630mm, black
Sold by AUTODOC
JP GROUP 1297103000 ABS sensor
Front Axle Right, Front Axle Left, Passive sensor, 610mm, white
Sold by AUTODOC
JP GROUP 1297102700 ABS sensor
Front Axle Right, Front Axle Left, Passive sensor, 560mm, white
Sold by AUTODOC
JP GROUP 1297100300 ABS sensor
Sold by AUTODOC
JP GROUP 1297103200 ABS sensor
Rear Axle, Active sensor, 574mm, black
Sold by AUTODOC
JP GROUP 6397102200 ABS sensor
Rear Axle Left, Rear Axle Right, Active sensor, 190mm, grey
Sold by AUTODOC
JP GROUP 3097100100 ABS sensor
Rear Axle Left, Rear Axle Right, Active sensor, 2-pin connector, 560mm
Sold by AUTODOC
JP GROUP 3197100400 ABS sensor
Front Axle Left, Front Axle Right, Active sensor
Sold by AUTODOC
JP GROUP 1297103100 ABS sensor
Front Axle Right, Front Axle Left, Passive sensor, 790mm, black
Sold by AUTODOC
JP GROUP 6397102100 ABS sensor
Front Axle Right, Front Axle Left, Active sensor, 60mm, grey
Sold by AUTODOC
JP GROUP 4197101109 ABS sensor
Front Axle Right, Front Axle Left, Hall Sensor, 2
Sold by AUTODOC
JP GROUP 1197100689 ABS sensor
Rear Axle Right, Active sensor
Sold by AUTODOC
JP GROUP 1197106100 ABS sensor
Active sensor, 28mm, black
Sold by AUTODOC
JP GROUP abs sensor for OPEL MERIVA: top must-read articles
JP GROUP ABS sensor: What is the price of this product for the OPEL MERIVA?
The price of JP GROUP products in the category ABS sensor for the OPEL MERIVA ranges from £12.00 to £21.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return JP GROUP abs sensor for OPEL MERIVA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
