SEAT 127 Hatchback abs sensor
Where to buy SEAT 127 Hatchback abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce 127 Hatchback abs sensor replacement costs
Best selling replacement part: ABS sensor SEAT . You have the choice between various ABS wheel speed sensor SEAT brand manufacturers or to buy another high quality car part
BOSCH WS504 ABS sensor
without cable, Active sensor, 66mm
Sold by AUTODOC
VEMO 1011914 ABS sensor ring
Front Axle, Original VEMO Quality
Sold by AUTODOC
ATE 360390 ABS sensor
without cable
Sold by AUTODOC
AIC 55332 ABS sensor ring
Magnetic, Number of Teeth: 86, Rear Axle both sides
Sold by AUTODOC
ABAKUS 120-02-036 ABS sensor
Front Axle Left, without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
AIC 59122 ABS sensor ring
Number of Teeth: 86, Rear Axle Left, Rear Axle Right
Sold by AUTODOC
FEBI BILSTEIN 23816 ABS sensor
Front Axle Right
Sold by AUTODOC
ABAKUS 120-02-158 ABS sensor
Front Axle Right, Hall Sensor, 2-pin connector
Sold by AUTODOC
ATE 360365 ABS sensor
without cable
Sold by AUTODOC
ABAKUS 120-02-035 ABS sensor
Front Axle Left, without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
MAGNETI MARELLI MWSS068 ABS sensor
Rear Axle Right, 2-pin connector
Sold by AUTODOC
ATE 360306 ABS sensor
without cable
Sold by AUTODOC
MAGNETI MARELLI MWSS002 ABS sensor
Rear Axle, 2-pin connector, 1100 Ohm
Sold by AUTODOC
JPN 75E9269-JPN ABS sensor
Rear Axle both sides
Sold by AUTODOC
FEBI BILSTEIN 23822 ABS sensor
Sold by AUTODOC
FEBI BILSTEIN 33541 ABS sensor
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
JPN 75E9241-JPN ABS sensor
Front Axle Right
Sold by AUTODOC
ATE 360282 ABS sensor
479mm, prepared for wear warning indicator
Sold by AUTODOC
JPN 75E9245-JPN ABS sensor
Sold by AUTODOC
ABAKUS 120-03-025 ABS sensor
Rear Axle Left, Hall Sensor, 2-pin connector
Sold by AUTODOC
Wheel speed sensor SEAT 127 Hatchback car models
The most read articles on the topic abs sensor for SEAT 127 Hatchback
ABS sensor SEAT 127 Hatchback: which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) SEAT come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS SEAT 127 Hatchback: how much does this product cost?
The price of car parts within the category ABS wheel speed sensor SEAT 127 Hatchback ranges from £5.00 to £56.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return SEAT 127 Hatchback abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
