Abs sensor JPN CITROËN RELAY
CITROËN RELAY: JPN Abs sensor
JPN Wheel speed sensor: parts for popular CITROËN RELAY variants
Sensor ABS CITROËN RELAY: original-quality parts from top brands
Have you ever bought JPN products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
JPN ABS wheel speed sensor CITROËN RELAY – high-quality parts from reputable brands
We offer JPN brand produts in OEM quality. Find the right branded Abs sensor spare part your CITROËN RELAY car in our catagory.
JPN 75E9305-JPN ABS sensor
Front axle both sides, 520mm, 1070mm
JPN 75E9306-JPN ABS sensor
Rear Axle both sides, 883mm
JPN 75E9538-JPN ABS sensor
Rear Axle, Active sensor, 1370mm, black
JPN 75E9304-JPN ABS sensor
Front axle both sides, 1355mm
JPN 75E9289-JPN ABS sensor
Front axle both sides, 1300mm
JPN 75E9335-JPN ABS sensor
Front axle both sides, 708mm
JPN 75E9290-JPN ABS sensor
Rear Axle both sides
JPN 75E9506-JPN ABS sensor
Front Axle, Active sensor, 675mm, white
JPN 75E9508-JPN ABS sensor
Front Axle, Active sensor, 740mm, black
JPN 75E9265-JPN ABS sensor
Front axle both sides, 1170mm
JPN 75E9275-JPN ABS sensor
Rear Axle both sides, 1800mm
JPN 75E9297-JPN ABS sensor
Passive sensor, 940mm, grey
JPN 75E2069-JPN ABS sensor
Rear Axle
JPN 75E9523-JPN ABS sensor
Rear Axle, Active sensor, 1460mm, grey
JPN 75E9578-JPN ABS sensor
Rear Axle Right, Active sensor, 1020mm, black
JPN Abs sensor: What is the price of this product for the CITROËN RELAY?
The price of JPN products in the category Abs sensor for the CITROËN RELAY ranges from £15,00 to £21,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return JPN abs sensor for CITROЁN RELAY without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
